--- title: "3.1 Default Configuration & Factory Reset Information" slug: "31-default-configuration" updated: 2025-07-14T15:46:48Z published: 2025-07-14T15:46:48Z canonical: "knowledgebase.morningstarcorp.com/31-default-configuration" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledgebase.morningstarcorp.com/llms.txt > Use this file to discover all available pages before exploring further. # 3.1 Default Configuration & Factory Reset Information The ReadyEdge is programmed with a default configuration out of the box for up to two devices connected through MeterBus. No further configuration is needed if these settings are sufficient. Sections 3.2 - 3.5 detail the user interfaces and how to connect to each. Skip to section 4.0 Operation to learn more about ReadyEdge features and functionality. ### Restore Default Settings If there is a need to return to default configuration, there are two options. **Restore Default Communication Settings Only** Locate the small gray button labeled reset to the left of the LED Indications. This will only reset communication settings back to default. **Restore All Default Settings with a Factory Reset** Locate the small gray button labeled reset to the left of the LED Indications. Press and hold for 10 seconds. ![Diagram showing reset button location.](https://cdn.document360.io/5c3867fe-b3a6-44b5-80c7-4bc7662cc267/Images/Documentation/READYEDGE_RESET_BUTTON_LOCATION.png) Reset Button Location