--- title: "3.3 Accessing LiveView Web App" slug: "liveview-commissioning-configuration" updated: 2026-02-27T21:05:05Z published: 2026-02-27T21:05:05Z canonical: "knowledgebase.morningstarcorp.com/liveview-commissioning-configuration" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledgebase.morningstarcorp.com/llms.txt > Use this file to discover all available pages before exploring further. # 3.3 Accessing LiveView Web App LiveView Web App is the primary interface used to configure the ReadyEdge. If the ReadyEdge was connected to a LAN router that is configured for DHCP, the ReadyEdge network settings should automatically be assigned when powered up and the unit should automatically connect to the network. ## Connecting to LiveView on a Local Area Network (LAN) 1. Every ReadyEdge has a unique NetBIOS name which is used for LiveView URL as follows: http:// + “re” + serial number For example, if the ReadyEdge serial number is 09501234, then the unit’s LiveView URL is: http://re09501234 You can find the NetBIOS name on the serial label 2. Enter the ReadyEdge NetBIOS name into the address bar of a web browser (the computer must be on the same local network as the ReadyEdge). In the example above, the web address is: [http://re09501234](http://re09501234). LiveView webpages are context-aware and will properly format to the device’s screen size. > ![](https://cdn.document360.io/5c3867fe-b3a6-44b5-80c7-4bc7662cc267/Images/Documentation/Note(1).png) **NOTE:** The IP address assignment will change after some period of time on most DHCP networks. The NetBIOS address is a static Morningstar Device identifier, and will always point to the Morningstar Device regardless of IP address assigned.