--- title: "1.3 Features - Exterior" slug: "23-features-exterior" updated: 2026-03-12T15:11:56Z published: 2026-03-12T18:30:24Z canonical: "knowledgebase.morningstarcorp.com/23-features-exterior" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledgebase.morningstarcorp.com/llms.txt > Use this file to discover all available pages before exploring further. # 1.3 Features - Exterior GenStar MPPT exterior and meter features are shown in Figures 1 and 2. A brief description of each feature follows the figures. ![Diagram of a device with labeled components and a display screen for identification.](https://cdn.document360.io/5c3867fe-b3a6-44b5-80c7-4bc7662cc267/Images/Documentation/2.3-features---exterior-image-hsvvnqt8(1).jpg) Figure 1. GenStar MPPT Exterior Features. | ## Exterior Features | | --- | | 1 | Meter Display Screen | LCD read-out for setting and programming navigation | | 2 | Coin Cell / Accessory Cover Screw | | | 3 | Coin Cell / Accessory Cover | Plastic protective cover for accessory terminals and coin cell compartment | | 4 | Power Terminal Cover Screw (1 of 2) | | | 5 | Power Terminal Cover | Plastic protective cover for power terminal lugs and communication ports | | 6 | Heatsink | Aluminum heatsink to dissipate GenStar MPPT heat | | 7 | ReadyBlock Cover Screw | | | 8 | ReadyBlock Tabs | Removable plastic protective panels for ReadyBlock installation | | 9 | ReadyBlock Cover | Plastic protective cover for ReadyBlocks and ReadyRailTM | | 10 | ReadyBlock Cover Clips and Anchor Hole Locations | (2) Plastic extension flanges to secure cover in molded plastic anchors | ![Diagram of a gaming controller with labeled buttons and features for reference.](https://cdn.document360.io/5c3867fe-b3a6-44b5-80c7-4bc7662cc267/Images/Documentation/2.3-features---exterior-image-xxsypj51(1).jpg) Figure 2. Meter Features | ## Meter Features | | --- | | 1 | SD Card Slot | Has SD card installed. External memory card slot for saving configurations and updating firmware | > [!CAUTION] > ![Warning symbol indicating high voltage with a lightning bolt inside a triangle.](https://cdn.document360.io/5c3867fe-b3a6-44b5-80c7-4bc7662cc267/Images/Documentation/warning ISO(1).png) WARNING: RISK OF EXPLOSION > > When loading a system image configuration from an SD Card, ensure that the destination device has the same system voltage, battery profile, and RTS; otherwise, there is a potential risk of system damage or bodily injury. | ## Meter Features | | --- | | 2 | Meter Directional Buttons | Meter navigational controls | | 3 | Charging Status LED | Unit Charging State and Fault and Alarm indicator | | 4 | Programmable Soft-key | Push-button control for command activation | | 5 | State-of-charge LEDs | Approximate battery state-of-charge indicators. | > [!NOTE] > ![A hand pointing to the right, indicating direction or emphasis on an object.](https://cdn.document360.io/5c3867fe-b3a6-44b5-80c7-4bc7662cc267/Images/Documentation/note hand ISO(2).png) NOTE: > > Indicator becomes more precise when ReadyShunt or Ready BMS is installed.