--- title: "1.5 Optional Accessories" slug: "25-optional-accessories" updated: 2026-03-11T18:07:10Z published: 2026-03-12T18:30:24Z canonical: "knowledgebase.morningstarcorp.com/25-optional-accessories" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledgebase.morningstarcorp.com/llms.txt > Use this file to discover all available pages before exploring further. # 1.5 Optional Accessories The following Morningstar accessories are available for purchase separately from your authorized Morningstar dealer: **Ground-fault Protection Device (GFPD-600V)** The GFPD-600V detects power source ground faults and interrupts current as required by the U.S. National Electrical Code. For a PV array with a maximum open circuit voltage less than 150V, a GFPD-150V can be used for ground fault protection. ### READYBLOCK BOS ACCESSORIES: See product manuals at [www.morningstarcorp.com/support/library/](http://www.morningstarcorp.com/support/library/) **ReadyRelay (RB-Relay)** The ReadyRelay is an expansion block that adds AC and DC-rated relay dry contact hardware functionality and firmware control and logic to the Morningstar GenStar MPPT charge controller. **ReadyShunt (RB-Shunt)** The ReadyShunt is an expansion block designed to display measured branch circuit currents and Amp-hours. When used in the battery circuit, the ReadyShunt acts as a battery meter providing state-of-charge (SOC) %, battery charging current limiting and other functionality. **ReadyBMS (RB-BMS)** The ReadyBMS provides simple visibility of battery performance, hands-free settings and optimized battery control. Through the ReadyBMS, the GenStar MPPT will report any data variable contained in the battery BMS. The Block can also interface with lithium batteries for, "closed loop", charging and data reporting.