--- title: "3.19 Prevent Modifications by Enabling Read-Only Mode" slug: "32-allow-modifications-writes" updated: 2025-11-19T14:12:41Z published: 2025-11-19T14:12:41Z canonical: "knowledgebase.morningstarcorp.com/32-allow-modifications-writes" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledgebase.morningstarcorp.com/llms.txt > Use this file to discover all available pages before exploring further. # 3.19 Prevent Modifications by Enabling Read-Only Mode After all changes to ReadyEdge settings are complete, the *Read-Only Enable* DIP switch can be set to prevent any further changes. This feature prevents further configuration changes via the LiveView and Mobile App user interfaces. > ![](https://cdn.document360.io/5c3867fe-b3a6-44b5-80c7-4bc7662cc267/Images/Documentation/Note(1).png) ***NOTE****: This feature does not prevent modification of settings using MODBUS protocol write commands.* > ![](https://cdn.document360.io/5c3867fe-b3a6-44b5-80c7-4bc7662cc267/Images/Documentation/Note(1).png) ***NOTE****: This feature does not prevent modification of settings using SNMP protocol.* To enable Read-Only Mode, DIP switch 1 must be placed in the UP / ON position as show in illustration 3.8 below. The Read-Only LED should turn RED. ![A diagram showing how to set DIP switch 1 to enable write protect](https://cdn.document360.io/5c3867fe-b3a6-44b5-80c7-4bc7662cc267/Images/Documentation/READYEDGE_SET_DIPSW_1(1).png) *3.8 Set DIP switch 1 ON to enable read-only mode*