--- title: "4.10 Firmware Updates" slug: "510-firmware-updates" updated: 2026-03-12T15:59:11Z published: 2026-03-12T18:30:24Z canonical: "knowledgebase.morningstarcorp.com/510-firmware-updates" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledgebase.morningstarcorp.com/llms.txt > Use this file to discover all available pages before exploring further. # 4.10 Firmware Updates > [!NOTE] > ![A hand pointing to the right, indicating direction or emphasis on an object.](https://cdn.document360.io/5c3867fe-b3a6-44b5-80c7-4bc7662cc267/Images/Documentation/note hand ISO(2).png) NOTE: > > Security related firmware updates will be provided for a minimum of five (5) years from date of manufacture. It is recommended to keep the GenStar MPPT controller updated with the latest version of the firmware as it becomes available. Refer to the GenStar MPPT Firmware Updates Guide, available on the GenStar MPPT Firmware page, for complete firmware update instructions: https://[www.morningstarcorp.com/technical-](http://www.morningstarcorp.com/technical-) doc-genstar-firmware-updates-guide/ There are four ways to update the firmware for the GenStar MPPT controller: - SD Card - LiveView Webpage - Morningstar Mobile App - MSLoadTM Windows Utility program **Download Firmware** To use an SD Card, LiveView or MSLoadTM, the GenStar MPPT firmware must first be downloaded from the Morningstar website at https://[www.morningstarcorp.com/firmware/genstar-mppt-firmware/.](http://www.morningstarcorp.com/firmware/genstar-mppt-firmware/) The firmware file will download to your computer as a ZIP folder, and will need to be extracted for use. Once extracted, save the GenStar firmware file to an easily accessible location, e.g., desktop. **SD Card** 1. Copy the downloaded firmware file to the /FIRMWARE directory of the SD card (included). 2. Insert SD card into the side slot to the left of the GenStar MPPT meter 3. Navigate to Setup\Firmware\Load Firmware 4. Select the desired firmware file, and confirm loading from the SD Card 5. A progress bar will indicate loading of firmware update into the GenStar MPPT memory. This will take several minutes. 6. When complete, select Okay to update the GenStar MPPT firmware After loading the firmware file into GenStar MPPT memory the GenStar will need to be rebooted. Wait for the green flashing LED to become solid before rebooting the controller again to complete the process (note that the Green LED flashing will stop once and start again after approx. 45 seconds). **LiveView Webpage** To update firmware via an RJ-45/Ethernet connection, first follow the instructions in 3.1.3 to set up a LiveView connection in a Web browser. Select the "Update" tab and then select "Choose a File", select the new GenStar firmware .msc file and click the "Upload" button. Follow the prompts to reboot the controller. It may take up to 10 minutes or more depending on the speed of the connection to complete the firmware update. > [!WARNING] > ![Warning symbol indicating caution or alertness in various contexts.](https://cdn.document360.io/5c3867fe-b3a6-44b5-80c7-4bc7662cc267/Images/Documentation/caution ISO.png) CAUTION: > > The controller may fail to properly reboot after a firmware update leaving the system offline and without power. It is recommended to be physically near the device during the firmware update in the event a manual power cycle is needed to bring the system back online. Before starting, always select the checkbox to automatically reboot after the update on the Update tab and then select reboot when prompted during the update. The system will lose power during a reboot. **Morningstar Mobile App** The Morningstar Mobile App includes the latest version of the GenStar firmware when installing or updating the app. See Section 3.1.2 for information about the Morningstar Mobile App. After connecting to the GenStar MPPT controller, select the firmware update icon on the bottom right of the mobile app and follow the directions on the screen to update the firmware. > [!NOTE] > ![A hand pointing to the right, indicating direction or emphasis on an object.](https://cdn.document360.io/5c3867fe-b3a6-44b5-80c7-4bc7662cc267/Images/Documentation/note hand ISO(2).png) NOTE: > > Keep the Morningstar Mobile App open and maintain a Bluetooth connection with the GenStar MPPT controller during the Firmware update. If the connection is lost, it may be necessary to cycle power to the GenStar and re-start the firmware update. **MSLoadTM Windows Utility program** For USB, RS-232 or EIA-485 serial connections, download MSLoadTM from morningstarcorp.com to a PC. With access to the new firmware (.msc) file, start MSLoad and when prompted, choose the desired file. Refer to the README file included with MSLoad for detailed instructions.