--- title: "5.7 Network Information" slug: "67-network-information" updated: 2026-03-12T16:02:38Z published: 2026-03-12T18:30:24Z canonical: "knowledgebase.morningstarcorp.com/67-network-information" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledgebase.morningstarcorp.com/llms.txt > Use this file to discover all available pages before exploring further. # 5.7 Network Information Connect to the GenStar MPPT via an Ethernet network (LAN/WAN) or connect the controller directly to a PC using an Ethernet cable. Use CAT-5 or CAT-5e twisted pair Ethernet cables with RJ-45 connectors. A network diagram for both scenarios is shown in Figure 20. ![Diagram illustrating network connection between devices using an Ethernet cable.](https://cdn.document360.io/5c3867fe-b3a6-44b5-80c7-4bc7662cc267/Images/Documentation/ethernet network diagrams.png) Figure 20. Ethernet Network Diagrams. | **Factory Default Network Settings** | | --- | | DHCP | Enabled | | LiveView Web Address | [http://gsmppt](http://gsmppt/) + serial number1 | | IP Address | 169.254.x.y (with no acknowledgement from the DHCP server) | | Subnet Mask | 255.255.255.0 | | Gateway | 192.168.1.1 | | Primary DNS Server | 169.254.1.1 | | MODBUS TCP/IPTM Port | 502 | | MODBUS TCP/IP HTML | 80 | *1 The LiveView web address is unique to each controller. If the GenStar MPPT serial number is 09501234, then the GenStar MPPT's LiveView address is:* [*http://gsmppt09501234.*](http://gsmppt0950123.4/) *For reference, the LiveView web address is printed on the serial label on the side of the unit.* The controller's MAC Address is located on the serial label on the side of the controller. Two (2) LEDs on the Ethernet jack indicate link and activity status. | **Condition** | **Green LED** | **Yellow LED** | | --- | --- | --- | | Network Connection OK | ON | OFF | | Network Activity | ON | Blinking | | Error | OFF | ON |