LiveView Web App is the primary interface used to configure the ReadyEdge. If the ReadyEdge was connected to a LAN router that is configured for DHCP, the ReadyEdge network settings should automatically be assigned when powered up and the unit should automatically connect to the network.
Connecting to LiveView on a Local Area Network (LAN)
Every ReadyEdge has a unique NetBIOS name which is used for LiveView URL as follows:
http:// + “re” + serial number
For example, if the ReadyEdge serial number is 09501234, then the unit’s LiveView URL is: http://re09501234
You can find the NetBIOS name on the serial label
Enter the ReadyEdge NetBIOS name into the address bar of a web browser (the computer must be on the same local network as the ReadyEdge). In the example above, the web address is: http://re09501234.
LiveView webpages are context-aware and will properly format to the device’s screen size.
NOTE: The IP address assignment will change after some period of time on most DHCP networks. The NetBIOS address is a static Morningstar Device identifier, and will always point to the Morningstar Device regardless of IP address assigned.