Compatible Morningstar products can be connected to the ReadyEdge using MeterBus and/or EIA-485 serial network. In some scenarios a communications hub or adapter may be needed. Table 2.4.9 below lists all compatible products along with the recommended network and adapter(s) for different connection scenarios.
Compatible Product | (1) Product Connected | (2) Products Connected | (3 to 16) Products Connected |
|---|---|---|---|
ProStar PWM (all models) | MeterBus direct connection | MeterBus direct connection | MeterBus + HUB-1 |
ProStar-MPPT (all models) | MeterBus direct connection | MeterBus direct connection | MeterBus + HUB-1 |
SunSaver-MPPT | MeterBus direct connection | MeterBus direct connection | MeterBus + HUB-1 |
SureSine-300 Classic (all models) | MeterBus direct connection | MeterBus direct connection | MeterBus + HUB-1 |
TriStar PWM (all models) | EIA-485 + RSC-1 adapter1 | EIA-485 + RSC-1 adapter1 | EIA-485 + RSC-1 adapter |
TriStar-MPPT-30 | EIA-485 + RSC-1 adapter1 | EIA-485 + RSC-1 adapter1 | EIA-485 + RSC-1 adapter |
TriStar-MPPT-45 | EIA-485 + RSC-1 adapter1 | EIA-485 + RSC-1 adapter1 | EIA-485 + RSC-1 adapter |
TriStar-MPPT-60 | EIA-485 direct connection | EIA-485 direct connection | EIA-485 direct connection |
TriStar-MPPT-60-600V | EIA-485 direct connection | EIA-485 direct connection | EIA-485 direct connection |
Table 2.4.9 Recommended Method of Connection for Compatible Products
(1) TriStar and TriStar-MPPT 30/45 models may also be connected via MeterBus using the Y-cable adapter (not included).
NOTE: A Y-cable adapter CANNOT be used in combination with HUB-1 for MeterBus networks. Always use EIA-485 bus to network three(3) or more TriStar and Tristar-MPPT controllers.