--- title: "Step 9: Connecting Morningstar Products" slug: "meterbus-legacy-controller-connections" updated: 2025-07-14T15:40:04Z published: 2025-07-14T15:40:04Z canonical: "knowledgebase.morningstarcorp.com/meterbus-legacy-controller-connections" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledgebase.morningstarcorp.com/llms.txt > Use this file to discover all available pages before exploring further. # Step 9: Connecting Morningstar Products Compatible Morningstar products can be connected to the ReadyEdge using MeterBus and/or EIA-485 serial network. In some scenarios a communications hub or adapter may be needed. Table 2.4.9 below lists all compatible products along with the recommended network and adapter(s) for different connection scenarios. | Compatible Product | (1) Product Connected | (2) Products Connected | (3 to 16) Products Connected | | --- | --- | --- | --- | | ProStar PWM (all models) | MeterBus direct connection | MeterBus direct connection | MeterBus + HUB-1 | | ProStar-MPPT (all models) | MeterBus direct connection | MeterBus direct connection | MeterBus + HUB-1 | | SunSaver-MPPT | MeterBus direct connection | MeterBus direct connection | MeterBus + HUB-1 | | SureSine-300 Classic (all models) | MeterBus direct connection | MeterBus direct connection | MeterBus + HUB-1 | | TriStar PWM (all models) | EIA-485 + RSC-1 adapter1 | EIA-485 + RSC-1 adapter1 | EIA-485 + RSC-1 adapter | | TriStar-MPPT-30 | EIA-485 + RSC-1 adapter1 | EIA-485 + RSC-1 adapter1 | EIA-485 + RSC-1 adapter | | TriStar-MPPT-45 | EIA-485 + RSC-1 adapter1 | EIA-485 + RSC-1 adapter1 | EIA-485 + RSC-1 adapter | | TriStar-MPPT-60 | EIA-485 direct connection | EIA-485 direct connection | EIA-485 direct connection | | TriStar-MPPT-60-600V | EIA-485 direct connection | EIA-485 direct connection | EIA-485 direct connection | *Table 2.4.9 Recommended Method of Connection for Compatible Products* *(1) TriStar and TriStar-MPPT 30/45 models may also be connected via MeterBus using the Y-cable adapter (not included).* > ![](https://cdn.document360.io/5c3867fe-b3a6-44b5-80c7-4bc7662cc267/Images/Documentation/Note(1).png) ***NOTE****: A Y-cable adapter CANNOT be used in combination with HUB-1 for MeterBus networks. Always use EIA-485 bus to network three(3) or more TriStar and Tristar-MPPT controllers.*