--- title: "1.3 Compatibility and Accessories" slug: "sop-template" updated: 2025-07-14T15:24:38Z published: 2025-07-14T15:24:38Z canonical: "knowledgebase.morningstarcorp.com/sop-template" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledgebase.morningstarcorp.com/llms.txt > Use this file to discover all available pages before exploring further. # 1.3 Compatibility and Accessories ### Morningstar Charge Controllers and Inverters - ProStar - ProStar MPPT - SunSaver MPPT - SureSine-300 - TriStar - TriStar MPPT 150V - Tristar MPPT 600V ### ReadyBlocks **ReadyRelay (RB-Relay)** A snap-in ReadyBlock enabling signaling and load control via two dry contact relays. It features programmable logic support for load control, Automatic Generator Start-Stop, and other purposes. **ReadyShunt (RB-Shunt)** A snap-in ReadyBlock enabling intelligent battery monitoring including SOC calculation and energy in/out (Amp hours). Can also be used for current measurement of system sources, loads and more. Features two current measurement channels. **ReadyBMS (RB-BMS)** A snap-in ReadyBlock enabling full communications and control with most lithium battery BMS (Battery Management Systems). The block features both CAN and EIA-485 interfaces. ### Other Accessories | Model # | Description | | | --- | --- | --- | | HUB-1 | MeterBus networking hub | Required when connecting (3) or more Morningstar devices to the ReadyEdge on a MeterBus network. The ReadyEdge supports up to (2) MeterBus devices natively without a hub. | | MRC-1 | MeterBus to EIA-485 Adapter | Converts a Morningstar device’s MeterBus port to a standard EIA-485 interface. | | Y-Cable | TriStar y-cable communication adapter | Connects TriStar PWM and TriStar-MPPT 30/45A models to MeterBus networks with Modbus communication | | RTS | Remote Temperature Sensor | Connect to a ReadyEdge “Temperature Sensor Input” to monitor temperature(s) in and around the system |