--- title: "2.2 Items Included and Tools Required" slug: "tools-required" updated: 2025-07-14T15:25:23Z published: 2025-07-14T15:25:23Z canonical: "knowledgebase.morningstarcorp.com/tools-required" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledgebase.morningstarcorp.com/llms.txt > Use this file to discover all available pages before exploring further. # 2.2 Items Included and Tools Required ### In the Box - Product Registration Card - Device Claim Code Card - Power Cable with ring terminals and inline fuse - MS-CAN terminator - Battery— CR 2032 Coin Cell, Preinstalled - Ethernet Cable - Two (2) MeterBus RJ-11 cables, 1 m length each - EIA-485 Pluggable Connector 3-pos terminal block - Input Power Pluggable Spring Clamp Terminal Block, 2-pin, 5.08 mm* - AC Detect Pluggable Spring Clamp Terminal Block, 2-pin, 3.5 mm* - Digital Inputs Pluggable Spring Clamp Terminal Block, 2x6-pin, 3.5 mm* - Analog Inputs Pluggable Spring Clamp Terminal Block, 2x6-pin, 3.5 mm* - Ferrite Choke: 205 OHM@100MHZ EMI - Short DIN Rail 75 mm, for mounting the ReadyEdge without ReadyBlocks - Long DIN Rail 225 mm, for mounting the ReadyEdge with ReadyBlocks - DIN-rail Mounting Screws, Pack of Four (4) - Two (2) DIN Clamp Screws, M3 X 50 mm (inserted through ReadyEdge case) *Wire Size: #24-16 AWG / 0.2 - 1.3 mm² ### Tools Needed - Not Included - Drill, 1/8”(3 mm) bit - Phillips Screwdriver, #1 and #2 - Pencil - Standard Screwdriver, 3/32” (2.5 mm) - Digital Multimeter