Time/Date is used for log data time-stamping, AGS control, schedules, and other time-based functions. It is important to set the correct Date & Time for optimal performance and operation.
Time & Date Settings can be found in LiveView Setup Menu under the Date & Time tab or in Morningstar Mobile App under Setup > Date & Time menu.
Step1 - Specify the Local Time Offset
Local Time Offset is your local time expressed as the number of hours:mins difference from Coordinated Universal Time (UTC). To find your Local Time Offset, reference the world map below. Note that these offsets are STANDARD time for each region.
.png)
Credit: Wikipedia.org List of UTC offsets
Step 2 - Choose from two Date/Time Source Options
Time Servers (recommended) - Select the Timer Servers source if the ReadyEdge is connected to the Internet. This option enables the ReadyEdge to periodically synchronize internal time and with internet-based time server(s). Accurate time and date will be maintained as long as there is a network connection. Time Server URLs can be modified in Network settings.
Internal clock - If an internet connection is not available in your application, use the ReadyEdge built-in real-time clock. The coin cell battery allows Time and Date to be retained through power cycles. If using the internal clock, UTC time and date are entered, and an offset for local time zone is specified. Note that the local offset must be adjusted when a time zone changes to DST, and back.
NOTE: Some time drift is inevitable when using the internal clock. We recommend connecting and adjusting time at Daylight Savings changes (if applicable) or annually.