4.9 History

Prev Next

The History Page consists of Daily Records, Event Logging and Ah and kWh Counters as indicated below. The Event Logger provides real-time stamping of system events on all aspects of operation. Combined, the history features provide a full picture that allows users to assess performance and investigate operational issues.

Daily Records

Displays the following records for up to 3-4 years in time; depending on how many daily variables are logged:

  • Battery NET (A-h)

    • Charging Timers (mins)

      • Absorption

      • Float

      • Equalize

  • Max. Battery Voltage (V)

  • Min. Battery Voltage (V)

  • Max. Battery Temperature (°C)

  • Min. Battery Temperature (°C)

  • Array Voltage max

  • GenStar Charge kWh

  • GenStar Charge Ah

  • GenStar Load Ah

  • System Net Battery Ah

  • System Charge kWh

  • GenStar Net Battery Ah

  • System Charge Ah

  • System Load Ah

  • Shunt (1a, 1b, 2a...) Ah (if installed)

  • Control reset (Yes, No)

  • Faults & Alarms

The GenStar can store a finite number of daily records internally. However, the data size of daily records will expand as data from ReadyBlocks and other accessories are added. This will reduce the maximum number of records that can be stored internally.

With the 8 GB SD card, nearly an infinite number of daily records can be stored (files only). The records on the SD card are not shown in LiveView.

Event Logging

All loggable variables are recorded, and can be filtered by event type, date range, specific date and some assignments within an Event Type. Event Types and variables may change depending on current firmware reporting parameters.

Event logging can be configured either in LiveView webpage or in local meter display.

A complete list of logged variables can be seen in local meter display or LiveView/History/Event Log Loggable events are divided into Event Types (and examples for each type):

  • Battery

  • Issues (Errors) - Faults and alarms

  • Network - Time servers, LAN connections

  • ESC - ESC events

  • Command - DC load output disconnected System

Counters

The Counters tab includes the accumulated Daily (today), Resettable and Total Ah and kW values. This includes the same Ah and kWh variables as indicated in the Daily Records above.

The Resettable and Total Counters can be cleared using the Counters Commands indicated in Section 4.8.2.