3.19 Prevent Modifications by Enabling Read-Only Mode

  • Updated on Nov 19, 2025
  • Published on Jul 14, 2025
  • 1 minute(s) read
Prev Next

After all changes to ReadyEdge settings are complete, the Read-Only Enable DIP switch can be set to prevent any further changes. This feature prevents further configuration changes via the LiveView and Mobile App user interfaces.

 NOTE: This feature does not prevent modification of settings using MODBUS protocol write commands.

 NOTE: This feature does not prevent modification of settings using SNMP protocol.

To enable Read-Only Mode, DIP switch 1 must be placed in the UP / ON position as show in illustration 3.8 below. The Read-Only LED should turn RED.

A diagram showing how to set DIP switch 1 to enable write protect

3.8 Set DIP switch 1 ON to enable read-only mode