3.0 Configuration
- 1 Sub categories
- 15 Articles
- Published on Jul 14, 2025
The ReadyEdge is programmed with a default configuration out of the box for up to two devices connected through MeterBus. No further configuration is needed if these settings are sufficient. Sections 3.2 - 3.5 detail the user interfaces and ho...
- Published on Jul 14, 2025
ReadyEdge supports (3) different user interfaces. Each interface serves a different need as shown in Table 3.2 below. The LiveView web app provides access to all settings and is the primary interface for configuration. Table 3.2 ReadyEdge Int...
- Updated on Feb 27, 2026
- Published on Jul 14, 2025
LiveView Web App is the primary interface used to configure the ReadyEdge. If the ReadyEdge was connected to a LAN router that is configured for DHCP, the ReadyEdge network settings should automatically be assigned when powered up and the unit shoul...
- Published on Jul 14, 2025
NOTE: The Morningstar Mobile App provides limited access to real time data and configuration settings. LiveView is the primary interface for ReadyEdge configuration at this time. Morningstar Mobile is an app available for use with Android o...
3.5 Configure Morningstar Solar Connect Data Service
- 3 Articles
- Published on Sep 26, 2025
Enabling Installer Access in Morningstar Mobile App Not implemented at this time. Enabling Installer Access in LiveView LiveView Installer Access provides access to settings configuration, Commands, and firmware update options for the ReadyEdge...
- Updated on Sep 25, 2025
- Published on Jul 14, 2025
Update the ReadyEdge firmware to the latest version before proceeding with configuration. This will ensure the latest functionality. Method 1: Morningstar Mobile App - Easiest Method Step 1: Follow the instructions in 3.4 Connect using Mornin...
- Published on Sep 29, 2025
Use the Admin tab under the Setup menu to modify the Installer Password. The Installer Password provides access to the Commands, Setup, and Update menus via the Lock/Unlock buttons in the upper right corner of the dashboard. NOTE : Only a ...
- Published on Sep 25, 2025
Time/Date is used for log data time-stamping, AGS control, schedules, and other time-based functions. It is important to set the correct Date & Time for optimal performance and operation. Time & Date Settings can be found in LiveView Setup...
- Published on Oct 12, 2025
Navigating to Network Settings in Morningstar Mobile App Network Settings can be found in the Setup Menu as shown below. Network Settings page in the mobile app Navigating to Network Settings in LiveView NOTE : Installer Acces...
- Published on Sep 25, 2025
Adjusting SNMP Settings in Morningstar Mobile App This adjustment is not yet supported in the mobile app. Adjusting SNMP Settings in LiveView Enable SNMP Version(s) The ReadyEdge Supports Simple Network Messaging Protocol (SNMP) v1, v2c...
- Published on Oct 17, 2025
NOTE : The DIP switches on the Connected Product (ProStar, TriStar, etc) must be set to the “Custom” setting to make use of these adjustable settings. Editing Connected Product Settings in Morningstar Mobile App Coming soon… Editing ...
- Published on Oct 17, 2025
Modify Network Settings Using Morningstar Mobile App These settings are currently only configurable using LiveView. See instructions below. Modify Inputs Settings Using LiveView Digital Inputs The ReadyEdge has six(6) Digital Input connecti...
- Published on Oct 17, 2025
Schedules can only be created and edited in LiveView. Use the Schedules Page to define and/or modify schedules for ReadyRelays and Automatic Generator Start. About Schedules Schedules define time blocks and days of the week based on the ReadyEdge...
- Updated on Nov 19, 2025
- Published on Jul 14, 2025
After all changes to ReadyEdge settings are complete, the Read-Only Enable DIP switch can be set to prevent any further changes. This feature prevents further configuration changes via the LiveView and Mobile App user interfaces. NOTE : T...